Crack Resistance Check

wolf_math · 1606

0 Members and 1 Guest are viewing this topic.

Offline wolf_math

  • Newbie
  • *
    • Posts: 3
on: April 26, 2017, 06:29:27 AM
I just finished the build on my Crack. In every place where I'm supposed to get a 0Ω (terminals 3, 6, 8, 10, 12, 14, 20, and 22) including the ground, I'm getting a resistance of between 1.1 and 1.5Ω.  Any ideas on what's going on here? All of the other resistance checks worked perfectly.

Thanks.



Offline fullheadofnothing

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 1487
  • A noble spirit embiggens the smallest man
Reply #1 on: April 26, 2017, 06:36:06 AM
What do you get when you touch your probes together?

Joshua Harris

I Write the Manuals That Make The Whole World Sing
Kit Packer Emeritus


Offline wolf_math

  • Newbie
  • *
    • Posts: 3
Reply #2 on: April 26, 2017, 06:47:49 AM
What do you get when you touch your probes together?

0Ω



Offline fullheadofnothing

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 1487
  • A noble spirit embiggens the smallest man
Reply #3 on: April 26, 2017, 06:49:47 AM
Then you have a miswire. Please post pictures.

Joshua Harris

I Write the Manuals That Make The Whole World Sing
Kit Packer Emeritus


Offline wolf_math

  • Newbie
  • *
    • Posts: 3
Reply #4 on: April 26, 2017, 06:51:02 AM
What do you get when you touch your probes together?

 >:( I figured it out. The alligator clip was adding 1Ω, but when I removed it everything was reading 0Ω.

Thanks for the help!



Offline fullheadofnothing

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 1487
  • A noble spirit embiggens the smallest man
Reply #5 on: April 26, 2017, 06:53:35 AM
Excellent!

Good luck with your voltages.

Joshua Harris

I Write the Manuals That Make The Whole World Sing
Kit Packer Emeritus