what wire to use?

denti alligator · 1733

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline denti alligator

  • Hero Member
  • *****
    • Posts: 1156
on: June 02, 2017, 03:29:06 PM
So I'm building this kit that I got from Jim, but it's missing a lot of parts, including wire. What wire should I get? 20 AWG. 600V. Check. Check. But insulation? At digikey the choices are a bit overwhelming, and I don't want to have to buy 100 feet of each color... Thoughts?

Is this what BH kits come with? https://www.digikey.com/product-detail/en/general-cable-carol-brand/C2118A.12.03/C2118R-100-ND/16236
« Last Edit: June 02, 2017, 03:40:09 PM by denti alligator »

- Sam

Rega P3-24 (w/AT 150MLX) w/Groovetracer upgrades / Eros II / FLAC >J.River >DSD256 >Gustard X20 / Moreplay > Stereomour II / Klipsch Forte II w/Crites upgrades / C4S S.E.X. 2.0 +Nickel MQ Iron / Speedball Crack / Sennheiser HD600 w/Cardas cable

Offline borism

  • Full Member
  • ***
    • Posts: 158
Reply #1 on: June 04, 2017, 02:48:14 PM
I bought mil spec silver coated teflon insulated wire - 20 AWG - on eBay. It comes in different colors and many sellers offer smaller quantities - 10 or 25 ft.

Boris

Offline mcandmar

  • Hero Member
  • *****
    • Posts: 1599
  • Not all engineers are civil
Reply #2 on: June 05, 2017, 04:15:48 AM
Here is a cheaper source.. http://www.ebay.com/itm/130912026815

M.McCandless

Offline Laudanum

  • Sr. Member
  • ****
    • Posts: 916
Reply #3 on: June 06, 2017, 10:05:00 AM
I have some of the solid core from McMaster carr.   Insulation could be a little higher temp. but it works well and you don't have to spend a bunch on a full 100ft roll.  Lots of colors too.

The site wont let me link direct but type wire into the search bar and then select "bend and stay", 600 volt, 20 gauge. 

https://www.mcmaster.com
« Last Edit: June 06, 2017, 10:08:42 AM by Laudanum »

Desmond G.

Pages: 1   Go Up
« previous next »