no sound in left channel on previously working Crack

bocosb · 1080

0 Members and 1 Guest are viewing this topic.

Offline bocosb

  • Newbie
  • *
    • Posts: 6
on: January 15, 2018, 12:36:41 AM
I bought my Crack+Speedball already built few years ago, worked fine, no problem - following a change of position on my desktop, suddenly there is no sound in the left channel but if i unplug my headphone jack just a little bit (so it's partially connected) i can hear the sound in both channels only its bad quality(sounds weird) - any ideas?



Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19772
Reply #1 on: January 15, 2018, 05:52:34 AM
You will need to do a voltage check on the Crack to determine which voltages are off.

When you pull the headphone plug out slightly, you get the right channel in both ears.

-PB

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man