Cheap cans with high impedance.

ToneDeaf · 6089

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline ToneDeaf

  • Jr. Member
  • **
    • Posts: 49
on: February 17, 2018, 05:59:56 AM
 I have a mainline on order. Now I'm saving and waiting for the Senn. HD820's to be released. So I'm looking for a $100.00 or less pair of cans To use while building the mainline. But all the cheap headphones I see are all low impedance. I willing to buy used. But I need a higher impedance for the mainline. I don't want to spend much money because then I have less for the 820's. Thank you all.


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19744
Reply #1 on: February 17, 2018, 07:08:52 AM
Quote from: ToneDeaf on February 17, 2018, 05:59:56 AM
I need a higher impedance for the mainline.
Why?

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline ToneDeaf

  • Jr. Member
  • **
    • Posts: 49
Reply #2 on: February 17, 2018, 07:17:47 AM
   I thought the mainline didn't like low impedance? However if they work at all it will be fine. They are only for the build.


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19744
Reply #3 on: February 17, 2018, 05:24:38 PM
The Crack isn't a good match for low impedance headphones, the Mainline will work quite well with low impedance headphones. 

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline ToneDeaf

  • Jr. Member
  • **
    • Posts: 49
Reply #4 on: February 17, 2018, 08:10:26 PM
Thank You. My mistake.


Pages: 1   Go Up
« previous next »