300b input set up pre out?

sharethemusic · 1179

0 Members and 1 Guest are viewing this topic.

Offline sharethemusic

  • Newbie
  • *
    • Posts: 2
on: March 07, 2018, 07:48:47 AM
hi,i just received a pre built 300b bottlehead..no manual..no instructions... which set of inputs is for pre out to mu amplifier...regards andy



Offline bombay317

  • Full Member
  • ***
    • Posts: 87
Reply #1 on: March 07, 2018, 08:16:54 AM
Are there markings on the underside of the metal where all the electronics are?  They should be labelled with Right and Left Inputs and Outputs.

Niagara 7000
Benchmark DAC3L (XBOX1 and TV)
CA Performance w/ Satisfy Turntable
Talismann V2 CA Cartridge
Tavish Designs Adagio Vacuum Tube Phono
BHSE Amp
Stax SR-009
BeePre 300B w/ BeeQuiet and Cinemag Transformers
Kaiju 300B w/ DC Filament
Jäger Speakers
Transparent and Benchmark Cables


Offline Chris65

  • Sr. Member
  • ****
    • Posts: 341
Reply #2 on: March 07, 2018, 10:10:55 AM
If you mean the BeePre 300B Pre-Amp, then the output is from the two sets of jacks at the back right - XLR's and RCA jacks in the standard configuration. The three sets of RCA jacks inboard are the inputs.

So, left to right: Input 3, Input 2, Input 1, Output 1 (RCA) Output 2 (XLR)

They should be labelled with Right and Left Inputs and Outputs.
Why would they be? Up to the builder whether they are labelled or not. ;)