Proper method for attaching 2.49K resistors?

MilderER · 1258

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline MilderER

  • Jr. Member
  • **
    • Posts: 33
on: October 18, 2022, 05:05:08 PM
Hi! What is the preferred method for attaching the 2.49K resistors to the lugs of the headphone jack? Do you eyeball the necessary lead-length and trim the leads before threading, wrapping, and crimping? Or do you bend and wrestle the leads into place as was necessary when attaching the 270K resistor to 12L/13L? (I'm guessing it's the former, but I'm a greenhorn at all this.)

Jonathan M

Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19694
Reply #1 on: October 19, 2022, 04:30:34 AM
Wrap the leads around the lugs on the headphone jack and solder them, then trim the excess.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline MilderER

  • Jr. Member
  • **
    • Posts: 33
Reply #2 on: October 20, 2022, 02:29:47 AM
Thanks, Paul. I took your advice, and it turned out not to be so difficult after all. Really appreciate the help.

Jonathan M

Pages: 1   Go Up
« previous next »