Knob for Alps Potentiometer

tim273 · 2444

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline tim273

  • Full Member
  • ***
    • Posts: 57
on: June 02, 2019, 04:46:33 AM
Hey Everyone,

So I updated the stock volume pot with an Alps one and it sounds great.  But of course it's longer than the stock one so the knob sticks up.  I know I could just cut it off with a hacksaw, but I was wondering if anyone knows of a knob that would fit over it?

Thanks!
Tim


Offline tim273

  • Full Member
  • ***
    • Posts: 57
Reply #1 on: June 02, 2019, 05:42:41 AM
Decided to give this one a try: https://www.mouser.com/ProductDetail/534-8560


Offline Lar

  • Full Member
  • ***
    • Posts: 86
Reply #2 on: June 02, 2019, 06:14:46 PM
If I recall correctly, :o I used a dremel on mine.

Larry V

Offline tim273

  • Full Member
  • ***
    • Posts: 57
Reply #3 on: June 06, 2019, 03:07:41 AM
The knob I got worked!

A slightly less expensive option with very similar specs is this one: https://www.mouser.com/ProductDetail/534-8556

I just liked the style of the other one better.
« Last Edit: June 06, 2019, 03:16:13 AM by tim273 »


Offline ALL212

  • Sr. Member
  • ****
    • Posts: 542
Reply #4 on: June 06, 2019, 04:27:58 AM
Sir,

It appears you have Schiit on your table!   ;D

Whatcha using?


Aaron Luebke

Offline tim273

  • Full Member
  • ***
    • Posts: 57
Reply #5 on: June 06, 2019, 04:57:41 AM
Quote from: ALL212 on June 06, 2019, 04:27:58 AM
Sir,

It appears you have Schiit on your table!   ;D

Whatcha using?

You are correct!  I'm using a Modi 3 and Wyrd.   I usually connect it to my Android phone and the Modi will drain the battery, so that's where the Wyrd comes in, plus all the other "decrapification" it provides. :)

And then I found these for right angle RCA adapters.  They're expensive, but really nice: https://www.bestbuy.com/site/audioquest-right-angle-rca-adapter-gold/5577831.p?skuId=5577831
« Last Edit: June 06, 2019, 04:59:13 AM by tim273 »


Offline JLDub

  • Jr. Member
  • **
    • Posts: 41
Reply #6 on: June 06, 2019, 10:57:36 AM
I think you need to send over that 421A to my place for some "testing". Fair warning: you may not get it back!

I just sold my Mimby and picked up a bstock Modi 3. Pocketed the rest. Hopefully, didn't make a mistake there.

I just plan on trimming the shaft with a dremmel. The knobs I've bought are cheap Chinese aluminum from eBay and would be too short but I love the look of them.


Offline tim273

  • Full Member
  • ***
    • Posts: 57
Reply #7 on: June 06, 2019, 12:30:09 PM
Quote from: Jamwagon on June 06, 2019, 10:57:36 AM
I think you need to send over that 421A to my place for some "testing". Fair warning: you may not get it back!

I could do that, but I'll need a $200 deposit first. :)


Offline JLDub

  • Jr. Member
  • **
    • Posts: 41
Reply #8 on: June 06, 2019, 03:53:19 PM
Heheh I get it. That's fair.


Offline ncsMD

  • Jr. Member
  • **
    • Posts: 11
Reply #9 on: June 09, 2019, 12:42:08 PM
Made the same mistake! Any idea where I can get a similar knob for less expensive? That link you posted is $10 for the knob + $8 for shipping :O

This isn't looking too pretty haha..PS: Nice WE 421A :D


Offline tim273

  • Full Member
  • ***
    • Posts: 57
Reply #10 on: June 09, 2019, 01:05:02 PM
This one is about $7, a little less I suppose.  https://www.mouser.com/ProductDetail/534-8556 

The other option is to go to Mouser (https://www.mouser.com/Electromechanical/Knobs-Dials/_/N-5g22) and then just filter by:

Product: Knobs
Shaft Diameter: 1/4 inch
Height: 23mm through 1 inch (multi-select)

Then see what comes up.
« Last Edit: June 09, 2019, 01:08:46 PM by tim273 »


Offline Robbo

  • Newbie
  • *
    • Posts: 5
Reply #11 on: June 27, 2019, 12:49:07 AM
This is mine. Quite expensive though £15 from hificollective plus postage. Looks awesome though IMO so was worth it...  :)


Pages: 1   Go Up
« previous next »