Question on replacing output caps

A Jedi · 2957

« previous next »
Pages: 1 2   Go Down

0 Members and 1 Guest are viewing this topic.

Offline A Jedi

  • Full Member
  • ***
    • Posts: 68
Reply #15 on: February 26, 2020, 04:01:15 AM
How long? Not long...a few minutes maybe?

Thanks for the answer. I'll wait longer and measure in the future  ;D


Offline Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9659
    • Bottlehead
Reply #16 on: February 26, 2020, 04:45:26 AM
Make sure the 270K ohm resistor is properly soldered. If it has a bad connection the supply won't drain off. A couple of minutes should be adequate to drain the B+ before poking around if the 270K resistor is working properly.

Dan "Doc B." Schmalle
President For Life
Bottlehead Corp.

Offline A Jedi

  • Full Member
  • ***
    • Posts: 68
Reply #17 on: February 26, 2020, 06:13:26 AM
Thank you sir.


Offline Todd R

  • Full Member
  • ***
    • Posts: 135
Reply #18 on: February 29, 2020, 03:17:38 AM
I use Audience Caps. Here's what they say.
https://www.justradios.com/auriINSTALL.html


Pages: 1 2   Go Up
« previous next »