Loud buzz in Right Ear and static in left

[shoto1699]

So my Bottlehead Crack has the right voltages but there's static coming through my left ear's headphones and a loud buzz in the right. It was working fine earlier but when I turned it off later on and turned it back again it came up but only went away after my monitor shut off for a second and then came back later on. Any ideas? I reheated everything already. The buzz came after I reseated the tubes again.

[Paul Birkeland]

Can you post photos of your build? 

Generally this kind of issue would be a loose solder joint in the amp, and often time we find that new builders are a little timid when it comes to applying adequate heat to get the solder to flow out all the way.

[shoto1699]

https://imgur.com/a/Trp07ac

[oguinn]

Might not be related but I'd pick up one of those ALPS PCBs on eBay instead of soldering to the potentiometer pins like that. Much easier and more reliable.

[shoto1699]

Good idea.. it was pretty hard to solder it but I ended up getting it done. I'll check it out

[oguinn]

Here's a recent thread on that PCB: https://forum.bottlehead.com/index.php?topic=12909.0;topicseen

[Paul Birkeland]

One black wire on your headphone jack does not look to be captured by solder.  If your iron has a temperature adjustment, I would turn it up all the way.  I would also trim back any leads that are poking out.