Terminal voltages for speedball upgrade

Tanthanis · 1147

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline Tanthanis

  • Newbie
  • *
    • Posts: 1
on: May 11, 2021, 09:19:46 PM
I just finished my crack amp and listened to it for a while. I just finished the speedball upgrade and some of the voltages on the readings for OA and OB were just over 100V (103 and 105). The voltage in the Manual says it should be 75-100 but it also says that the voltages are not exactly these figures.

The amp does run and it sounds great. Is it an issue to leave the OA and OB voltages just over 100V? G and B+ were 0 and 175V respectively.


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19757
Reply #1 on: May 12, 2021, 05:55:19 AM
That's not much of an issue provided those are the OA and OB voltages on the big board and not the small one. 

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Pages: 1   Go Up
« previous next »