Power for speakers

Knightstick · 2065

0 Members and 1 Guest are viewing this topic.

Offline Knightstick

  • Full Member
  • ***
    • Posts: 78
on: July 04, 2021, 11:21:16 AM
Hello, I have a pair of klipsch reference premiere rp-280 f's. The question is if I bought the stereomore amp, will it be sufficient to power these 98 db speakers? Thank you in advance.

Adam


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19745
Reply #1 on: July 04, 2021, 12:37:50 PM
For most people in most rooms, that's going to be plenty of power. 

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man


Offline Carbon13

  • Jr. Member
  • **
    • Posts: 14
Reply #2 on: July 05, 2021, 10:43:24 AM
Agree with Paul BUT the sensitivity may not be everything. My klipsch forte 1s are 96db but dip down below 4ohms at some points on the curve. I find they play loud enough with the stereomour but lack a bit of bass slam. Not to say that they are devoid of bass, not at all, it just doesn't hit you in the chest like a 20w pp amp. That said,  the stereomour has waaay better top end and midrange. I ended up adding a couple powered subwoofers to fill out the bottom end. All to say, check out the impedance curve too.