Integration resistor question

Neuronal · 8122

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline Neuronal

  • Full Member
  • ***
    • Posts: 120
    • Datta Lab Website
on: July 31, 2021, 11:59:39 AM
Hi all - I’m building the integration upgrade and was wondering what the wattage was on the 49.9 Ohm and 237 Ohm resistors? 1/8W and 1/4W respectively? The wattage isn’t in my version of the manual. Thanks in advance - Bob
« Last Edit: July 31, 2021, 12:01:18 PM by Neuronal »

Bob D
Rega P2, Cosecant DAC, Reduction, EFP III, Paramount V1.0 + soft start, Omega CAMs + DeepHemp 8s

Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19744
Reply #1 on: July 31, 2021, 02:40:48 PM
The 237 ohm resistors need to be at least 0.007W and the 49.9 ohm resistors need to be at least 0.04W. 

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline Neuronal

  • Full Member
  • ***
    • Posts: 120
    • Datta Lab Website
Reply #2 on: August 01, 2021, 12:46:05 PM
Cool, thanks!

Bob D
Rega P2, Cosecant DAC, Reduction, EFP III, Paramount V1.0 + soft start, Omega CAMs + DeepHemp 8s

Pages: 1   Go Up
« previous next »