Soldering Station.

Hilts · 7422

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline Hilts

  • Jr. Member
  • **
    • Posts: 36
on: January 16, 2022, 10:27:56 PM
Hello.....
Newbie Bottleheader here from UK. My Crack is on its way over the pond and just trying to get my equipment togeather. Looking to get a soldering station so I can get a bit of soldering practice in before the Crack arrives. Not looking to spend a fortune as probably won't be used much after. Are the cheapish (£30-£50) 50/60 watt Chinese ones on Amazon up to the job?
Thanks 👍


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19750
Reply #1 on: January 17, 2022, 04:20:51 AM
If you can stretch your budget, the FX888 by Hakko is a great station (but pay very careful attention to the instructions in the manual to adjust the temperature).

Otherwise I would go for something well reviewed that is 60+ watts and run it at its hottest temp.  Leaded solder (not lead free!) is also really important.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9658
    • Bottlehead
Reply #2 on: January 17, 2022, 05:11:50 AM

Dan "Doc B." Schmalle
President For Life
Bottlehead Corp.

Pages: 1   Go Up
« previous next »