Stereomour almost working [resolved]

Wayne100 · 2238

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline Wayne100

  • Newbie
  • *
    • Posts: 6
on: March 20, 2022, 08:04:27 AM
Did some troubleshooting with doc the other day and found 2 blown resistors going from terminal 44 to term 30 and 31. sent me new ones ,put them in and did voltage checks. All good except terminal 4 and 17 both zero on startup which is right but after about 30 seconds both read 9 volts. Is this ok?
« Last Edit: March 20, 2022, 08:37:48 AM by Paul Birkeland »


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19751
Reply #1 on: March 20, 2022, 08:06:48 AM
Do they read 9V, or something else like 9mV?

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline Wayne100

  • Newbie
  • *
    • Posts: 6
Reply #2 on: March 20, 2022, 08:14:32 AM
you are right mv


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19751
Reply #3 on: March 20, 2022, 08:14:52 AM
0.009V is plenty close to 0V in that position.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline Wayne100

  • Newbie
  • *
    • Posts: 6
Reply #4 on: March 20, 2022, 08:15:39 AM
Thanks Paul


Pages: 1   Go Up
« previous next »