Mirror image build issue (top plate brush on wrong side?) [resolved]

smodtactical · 1434

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline smodtactical

  • Full Member
  • ***
    • Posts: 86
on: May 07, 2022, 09:35:52 AM
So I started the build and noticed that I think this top plate my have been brushed on the wrong side because my build is a mirror image of the manual (horizontal flip). Is it ok to build like this? I noticed this when I got to page 19, 3rd image and the way i clipped the lug would not fit because of the mirror image nature of the build.
Thanks.
« Last Edit: May 07, 2022, 03:06:26 PM by Paul Birkeland »


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19745
Reply #1 on: May 07, 2022, 09:47:38 AM
I just responded to your e-mail.  Please don't proceed with your build on that plate, we'll get you a replacement ASAP.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline smodtactical

  • Full Member
  • ***
    • Posts: 86
Reply #2 on: May 07, 2022, 10:57:21 AM
Hold on Paul is the brushed side supposed to be on the top or bottom ?


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19745
Reply #3 on: May 07, 2022, 11:00:27 AM
The brushed finish is supposed to be the top side, but the way you have the parts populated is upside down.   It appears that you just have the parts mounted on the wrong side.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline smodtactical

  • Full Member
  • ***
    • Posts: 86
Reply #4 on: May 07, 2022, 01:16:35 PM
Yup I will take it all out and reverse it, thanks.


Pages: 1   Go Up
« previous next »