First question on new build

RANGE DOG · 1195

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline RANGE DOG

  • Jr. Member
  • **
    • Posts: 17
on: May 24, 2022, 02:05:03 PM
Page 26 of the directions states if your AC mains is lower than 110 V to put a jumper wire between #34u and terminal number three of the transformer.

 My household voltage is 120.5 so shall I skip this step ?
Thanks


Offline Paul Joppa

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 5833
Reply #1 on: May 24, 2022, 02:29:55 PM
If you read ahead a couple pages, you will see that there are three options - you want the one on p. 27, which is for 110-130v.

In Japan and a few other places, the standard line voltage is 100v. In the US and many other places it's 120v; in Europe and many other places it used to be 220 or 240v (most now call it 230v). So the transformer can be wired for any of those voltages.

Paul Joppa

Offline RANGE DOG

  • Jr. Member
  • **
    • Posts: 17
Reply #2 on: May 24, 2022, 02:46:18 PM
Thank you I just figured that out I guess I panicked
I didn’t want to skip ahead , But now I see it’s mandatory thanks for your help


Pages: 1   Go Up
« previous next »