Capacitor lead too short

blackharp · 5489

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline blackharp

  • Jr. Member
  • **
    • Posts: 44
on: April 29, 2023, 06:44:45 PM
On page 42, it calls for a striped lead of a 220uF cap to be connected to 10U and 12L, but the lead is too short. Am I missing something? I had to stop because it literally isn't long enough.


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19757
Reply #1 on: April 30, 2023, 05:07:27 AM
It's likely that the original part wasn't available for this batch of Kaijus.  You can attach the cap to those terminals and run a short black wire between 10U and 12L as a substitute.  There's extra wire provided with the kit, so this shouldn't compromise your build.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline blackharp

  • Jr. Member
  • **
    • Posts: 44
Reply #2 on: April 30, 2023, 05:42:44 AM
Awesome, thank you. Hard at work on a Sunday morning I see!


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19757
Reply #3 on: April 30, 2023, 05:45:12 AM
People usually want to (or have to) work on their amps on the weekends. 

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline blackharp

  • Jr. Member
  • **
    • Posts: 44
Reply #4 on: May 03, 2023, 06:18:13 AM
Well I really appreciate it. I'm sure you get tired of hearing it but, you guys have the best support I've encountered.


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19757
Reply #5 on: May 03, 2023, 06:50:56 AM
We'll be here as you need us.

-PB

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Pages: 1   Go Up
« previous next »