Another raw B+ test question

Rockyhill · 4475

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline Rockyhill

  • Jr. Member
  • **
    • Posts: 14
on: November 12, 2023, 04:25:09 AM
My raw B+ measures 340vdc. A/C line is 121v. Thoughts? Thanks.

Rob M

Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19757
Reply #1 on: November 12, 2023, 05:29:03 AM
Can you post a quick build photo showing the power transformer wiring just to be sure?  340V is a little bit on the high side, but not necessarily an issue if there isn't a miswire on the power transformer.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline Rockyhill

  • Jr. Member
  • **
    • Posts: 14
Reply #2 on: November 12, 2023, 06:45:03 AM
Here's a shot, thanks Paul.

Rob M

Offline AG

  • Jr. Member
  • **
    • Posts: 45
Reply #3 on: November 12, 2023, 06:53:51 AM
hi,
 the second resistor looks unsoldered IMO.

AG.

“Without music life would be a mistake”

Offline Rockyhill

  • Jr. Member
  • **
    • Posts: 14
Reply #4 on: November 12, 2023, 07:11:35 AM
From that angle it looks that way but it really is soldered. Plus those r's are for the heaters.

Rob M

Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19757
Reply #5 on: November 12, 2023, 07:13:20 AM
You can proceed with the build, no issues there that I can see.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline Rockyhill

  • Jr. Member
  • **
    • Posts: 14
Reply #6 on: November 12, 2023, 07:19:19 AM
Thank you!

Rob M

Pages: 1   Go Up
« previous next »