Voltage checks [resolved]

maarten · 166

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline maarten

  • Jr. Member
  • **
    • Posts: 24
on: November 24, 2024, 07:59:27 PM
Hi,

My resistance checks were all successful

All 12 LEDs are lighting up

I have the following:

IA 220V  OK
IB 220V  OK
OA 150V
OB 150V
OC 150V
OD 150V
OkA 150V
OkB 150V
OkC 10V
OkD 10V

So something is off. Will post pictures tonight, I have to leave for work now. If anyone already has an idea what could be wrong. I spent a lot of time double checking but you know how it goes.. it's always something one overlooked.
Thanks
« Last Edit: November 25, 2024, 02:23:39 PM by Paul Birkeland »


Offline maarten

  • Jr. Member
  • **
    • Posts: 24
Reply #1 on: November 25, 2024, 11:14:55 AM
Hi, I ended up fixing this by checking all connections.

Ultimately, B-A/B/C/D point was not connecting very well. All voltages are good now.

I'm now installing the Sowter 1990's and it would be very helpful to know the expected voltage/resistance checks after those. Thanks!


Offline Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9682
    • Bottlehead
Reply #2 on: November 25, 2024, 11:30:13 AM
Voltages will not change when you add stepup up transformers.

Dan "Doc B." Schmalle
President For Life
Bottlehead Corp.

Pages: 1   Go Up
« previous next »