Fuse for Crack 1.1 - I don’t understand

Leftistelf · 956

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline Leftistelf

  • Newbie
  • *
    • Posts: 1
on: May 24, 2025, 08:04:23 AM
Hi everyone,

I’m building the Crack 1.1 for the first time, and after I install the IEC, the instructions are to put the fuse in the fuse holder before testing the AC switch for the first time. I have the provided fuse, but I can’t find a fuse holder anywhere. What am I missing?

Thanks!


Offline Paul Joppa

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 5899
Reply #1 on: May 24, 2025, 09:21:17 AM
It's part of the IEC power inlet socket.

Paul Joppa

Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 20260
Reply #2 on: May 24, 2025, 10:04:13 AM
The picture on page 23 shows the fuse in the fuse holder, which slides out of the IEC power entry module. If it won't slide out, there's a hole on the back that you can use to give it some motivation.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Pages: 1   Go Up
« previous next »