AC or DC filament supply? and other questions.

andy2667 · 4171

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline andy2667

  • Jr. Member
  • **
    • Posts: 12
on: April 03, 2011, 03:14:22 AM
Hi,

I am interested in the Steromour. May I enquire the following:
1. Is the Steromour use A/C or DC filament supply?
2. Can it be configured as a power amp only? I already have a good pre and don't want to compromise the sound quality by palssing through the signal through a volume pot.
3. When the 220V-240v version be available?

Thanks

Andy


Offline Jim R.

  • Hero Member
  • *****
    • Posts: 2194
  • Blind Bottlehead
Reply #1 on: April 03, 2011, 05:40:43 AM
Andy,

The stereomour uses AC filaments, and yes, you can build it as a power amp only by leaving out the selector switch, volume pot, and loading the input with a 100k resistor.

Hope this helps,

Jim

Jim Rebman -- recovering audiophile

Equitech balanced power; uRendu, USB processor -> Musette DAC -> 5670 tube buffer -> Finale Audio F138 FFX -> Cain and Cain Abbys near-field).

s.e.x. 2.1 under construction.  Want list: Stereomour II

All ICs homemade (speaker and power next)

Offline andy2667

  • Jr. Member
  • **
    • Posts: 12
Reply #2 on: April 03, 2011, 07:36:23 PM
Thanks Jim. I am now using the Paramount configured as 2A3 dc amp. I am considering the stereomour as a 45 amp. I like AC filament for 45.

Waiting for the 220v -240v to place an order.

(ps : apart from the stereomour, I am also eyeing at the foreplay and crack)


Pages: 1   Go Up
« previous next »