Help with a power amp schematic?

tpatton · **on:** October 01, 2011, 10:52:23 AM

I could use some help with a power amp schematic, Quad II, that I could email to any takers. I'd like to know in particular which film caps deserve the most to be upgraded. You could email me at [email protected], and I'd respond by sending you the schematic. I'd be most grateful: this is not the first time that my ignorance of circuitry has gotten in my way. Thanks in advance!

Paul Joppa · **Reply #1 on:** October 01, 2011, 11:46:24 AM

I'll take a look.

coca · **Reply #2 on:** October 01, 2011, 02:01:17 PM

I have not seen the schematic for the Quad2 amp for a very long time, but if my memory serves me right, the output caps is a good place to start. I believe there is a .1mf cap there. I have about 5 of those amps around somewhere.

Bernie.

VoltSecond · **Reply #3 on:** October 01, 2011, 07:46:14 PM

Don't forget snubbing the diodes in the power supply (and ultrafast diodes.)

John Roman · **Reply #4 on:** October 02, 2011, 05:48:04 AM

This is an interesting project. I'd like to see the schematic as well.

coca · **Reply #5 on:** October 02, 2011, 07:49:59 AM

To see the schematic, go to triodeelectronics.com and see online index for schematics, and click on quad 2 amp.

John Roman · **Reply #6 on:** October 03, 2011, 06:47:09 AM

Just checked out the triode electronics site. I could spend the rest of the month just checking it all out. Great stuff!

Help with a power amp schematic?

tpatton

Help with a power amp schematic?

Paul Joppa

Re: Help with a power amp schematic?

coca

Re: Help with a power amp schematic?

VoltSecond

I'm game to give it a shot too.

John Roman

Re: Help with a power amp schematic?

coca

Re: Help with a power amp schematic?

John Roman

Re: Help with a power amp schematic?