Power Transformer Help (non BH)

dmannnnn · 10195

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline dmannnnn

  • Full Member
  • ***
    • Posts: 69
on: November 11, 2009, 02:43:19 PM
I have a piece of equipment for sale and an interested buyer in asia.  He wants me to convert it to 230vac.  It currently uses an Avel Lindberg 250va torroidal with dual 25vac secondaries.  I cannot seem to find anything equivalent in 230 volts.  It seems that both Avel Lindberg and Plitron only make 120vac transformers. 

Any ideas where to look?  A custom transformer would probably cost too much or take too long.  Is a step down his only option?

Harmon Kardon T60 - Hagerman Bugle - Cal Audio Labs CL15
ForePlayIII - Paramount 300B's
Klipsch RF-7/Altec Model 14/Magnepan MG12

Offline Paul Joppa

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 5833
Reply #1 on: November 11, 2009, 03:37:45 PM
Many companies - Hammond is one - make toroids with dual primaries for 117/234 volts. Mouser lists them.

Paul Joppa

Offline dmannnnn

  • Full Member
  • ***
    • Posts: 69
Reply #2 on: November 11, 2009, 03:51:10 PM
One set of each? so it could be switchable?

Thanks!

Harmon Kardon T60 - Hagerman Bugle - Cal Audio Labs CL15
ForePlayIII - Paramount 300B's
Klipsch RF-7/Altec Model 14/Magnepan MG12

Offline Tre

  • Newbie
  • *
    • Posts: 7
Reply #3 on: November 18, 2009, 05:55:39 AM
I believe there are two 117 volt primaries. Use them in parallel for 117 and series for 234. So yes, you could make the amp switchable.


Offline dmannnnn

  • Full Member
  • ***
    • Posts: 69
Reply #4 on: November 20, 2009, 07:20:41 PM
Yes, the transformer I'm using now has two 117v primaries and two 25v secondaries.  So if I wire the primaries in series and plug into a 234v line I will still get 25v at the secondaries?

Harmon Kardon T60 - Hagerman Bugle - Cal Audio Labs CL15
ForePlayIII - Paramount 300B's
Klipsch RF-7/Altec Model 14/Magnepan MG12

Offline Tre

  • Newbie
  • *
    • Posts: 7
Reply #5 on: November 22, 2009, 06:55:05 AM
Yes.




Offline Grainger49

  • Hero Member
  • *****
    • Posts: 7175
Reply #6 on: November 22, 2009, 08:07:52 AM
Be sure to wire the two windings so they add.  If you get the second winding out of phase I think the output will be zero, theoretically zero.


Offline dmannnnn

  • Full Member
  • ***
    • Posts: 69
Reply #7 on: November 22, 2009, 10:29:39 AM
Excellent.  Thanks guys.

Harmon Kardon T60 - Hagerman Bugle - Cal Audio Labs CL15
ForePlayIII - Paramount 300B's
Klipsch RF-7/Altec Model 14/Magnepan MG12

Pages: 1   Go Up
« previous next »