So Much Fun!

lextek · 4019

« previous next »
Pages: 1   Go Down

0 Members and 2 Guests are viewing this topic.

Offline lextek

  • Full Member
  • ***
    • Posts: 88
on: January 20, 2012, 05:05:25 PM
Just started working on my Crack kit today. Not to sound to corny, butnImam justnhaving a blastnbuilding this thing. So far I've justngot the top plate, transformer and endbell painted.  Used Rustoleum hammertone and it looks great.  Mounted the hardware on the plate and assembled the wood base.  Very, nice woodworking.  I'm sure this "simple" box is often overlooked.  Alder is a beautiful wood.
    At first I was intimidated about the electrical part.  But after looking at the manual I feel very confident.  Awesome instructions.  I'll post some pictures later.  Thanks Doc.
« Last Edit: January 20, 2012, 05:08:46 PM by lextek »

Bob Lasky

Offline porcupunctis

  • Sr. Member
  • ****
    • Posts: 386
  • 0D3
Reply #1 on: January 20, 2012, 06:31:50 PM
Revel in the build!  I get a real kick out of the building process, myself.  Soon you'll be kicking back listening to some really awesome sounding music and the next thing you know, you'll be ordering another kit.

Sounds like your hooked, welcome aboard.

Randall Massey
Teacher of Mathematics
Lifetime audio-electronics junkie

Offline Jim R.

  • Hero Member
  • *****
    • Posts: 2194
  • Blind Bottlehead
Reply #2 on: January 21, 2012, 04:10:08 AM
Lextek,

Yup, that's at least half the fun, at least for folks like me.  I revel in the building and take my sweet time doing it, and often undo and redo things to get them just right.

Then when the buddies come over for a listen to the finished product the second phase of proud poppa syndrome kicks in and you'll feel like passing out cigars :-).

Have fun,

Jim

Jim Rebman -- recovering audiophile

Equitech balanced power; uRendu, USB processor -> Musette DAC -> 5670 tube buffer -> Finale Audio F138 FFX -> Cain and Cain Abbys near-field).

s.e.x. 2.1 under construction.  Want list: Stereomour II

All ICs homemade (speaker and power next)

Offline lextek

  • Full Member
  • ***
    • Posts: 88
Reply #3 on: January 21, 2012, 12:05:34 PM
Finished.  It sounds amazing with the Sennheiser HD600s!  Still have to finish the base.  Would like to move the headphone jack to the front.  Also might put some "dummy" screwheads on the transformer endbell where there are no screws.  I had a blast building and learning from this amp.  Now I'll sit back and enjoy.  I think my Valhalla is going up for sale soon.........
« Last Edit: January 21, 2012, 12:09:43 PM by lextek »

Bob Lasky

Offline porcupunctis

  • Sr. Member
  • ****
    • Posts: 386
  • 0D3
Reply #4 on: January 21, 2012, 05:33:55 PM
Nice job on the build!  You've got a great looking amp there. 


Randall Massey
Teacher of Mathematics
Lifetime audio-electronics junkie

Offline Grainger49

  • Hero Member
  • *****
    • Posts: 7175
Reply #5 on: January 22, 2012, 06:34:40 AM
Nice tidy job too.  I appreciate good wiring practices.  I would move the B+ going to B5 farther away from the AC lugs if you are getting a little hum.  Leave it if there is no hum.

If you put the headphone jack on the front you will probably end up skidding it backward when plugging in headsets... I think.  If the jack isn't too tight you are good.


Offline lextek

  • Full Member
  • ***
    • Posts: 88
Reply #6 on: January 22, 2012, 09:11:37 AM
Quote from: Grainger49 on January 22, 2012, 06:34:40 AM
Nice tidy job too.  I appreciate good wiring practices.  I would move the B+ going to B5 farther away from the AC lugs if you are getting a little hum.  Leave it if there is no hum.

If you put the headphone jack on the front you will probably end up skidding it backward when plugging in headsets... I think.  If the jack isn't too tight you are good.
Thanks.  No hum at all, dead quiet.  Decided to leave the headphone jack where it is.  Ordered a right angle Neutrik TRS connector for my Moon-Audio Blue Dragon cable.  Easier

Bob Lasky

Offline denti alligator

  • Hero Member
  • *****
    • Posts: 1156
Reply #7 on: January 22, 2012, 10:18:29 AM
I've got the HD-600s too. What kind of difference does the Moon-Audio cable make?

- Sam

Rega P3-24 (w/AT 150MLX) w/Groovetracer upgrades / Eros II / FLAC >J.River >DSD256 >Gustard X20 / Moreplay > Stereomour II / Klipsch Forte II w/Crites upgrades / C4S S.E.X. 2.0 +Nickel MQ Iron / Speedball Crack / Sennheiser HD600 w/Cardas cable

Offline mchurch

  • Full Member
  • ***
    • Posts: 81
Reply #8 on: January 22, 2012, 02:05:42 PM
Really Nice work!! As noted good wiring practices and nice finish on the chassis plate.


Mike


Offline Natural Sound

  • Sr. Member
  • ****
    • Posts: 998
Reply #9 on: January 23, 2012, 05:05:44 AM
Nice job. I used the same paint on mine.
http://www.bottlehead.com/smf/index.php/topic,1222.0.html


Offline lextek

  • Full Member
  • ***
    • Posts: 88
Reply #10 on: January 24, 2012, 12:28:31 PM
Quote from: denti alligator on January 22, 2012, 10:18:29 AM
I've got the HD-600s too. What kind of difference does the Moon-Audio cable make?

The Blue Dragon opens up the sound  some.  Seems help with the detail. 

Bob Lasky

Offline lextek

  • Full Member
  • ***
    • Posts: 88
Reply #11 on: January 28, 2012, 04:22:29 AM
Got around to swapping out the connector on the Blue Dragon cable for a right angle one.  Much cleaner look with the Crack.

Bob Lasky

Pages: 1   Go Up
« previous next »