Soft start retrofit

rayrad · 2049

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline rayrad

  • Jr. Member
  • **
    • Posts: 13
on: August 02, 2012, 06:12:14 PM
 :-\ Just installed the soft start retrofit in my Paramount 2A3. For the voltage test it says the voltage on terminal 13 should be 94 vdc. From what I have, T13 and T18 are both grounded and if this correct, there should be no potential difference. Am I missing something?


Raymond Smith

Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19751
Reply #1 on: August 02, 2012, 06:17:55 PM
Quite correct, you will undoubtedly find that terminal 12 does not have 0V DC, looks like some numbers got swapped. 

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Pages: 1   Go Up
« previous next »