Project finished!

Demsy · 2239

0 Members and 1 Guest are viewing this topic.

Offline Demsy

  • Full Member
  • ***
    • Posts: 112
on: September 30, 2012, 05:48:52 AM
Finished assembling the Paramount pair with the help of the very helpful people in this very friendly forum :). Checked the resistance and voltage, all values are very close to the numbers on the list. Except for some confusion because of the typos on the terminal strip tabs (10 should be 0 volt, 11 = 233 volt and 12 = 164 volt), the manual is very good, about the easiest to follow.

I've listened for about 4 hours, using Martin Logan SL-3 and source is Audiolab 8200CD directly connected to the Paramounts. I can say one thing, very musical!

I'm going to build a DTQWT speakers, soon, the sensitivity is 95db which will make it a better match. I'll write a report when the speakers are finished.

Thanks again for all the help, guys!



Offline Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9641
    • Bottlehead
Reply #1 on: October 04, 2012, 06:12:28 AM
Somehow I missed this when you posted. Congrats Demsy!

Dan "Doc B." Schmalle
President For Life
Bottlehead Corp.