Looking For A 90 Degree 120V Male Plug - Found!

[Grainger49]

I'm looking for a plug that has terminals.  I need it for my last Bottlehead Power Cord.  My P300 is plugged into an outlet (PS Audio Power Port) behind a very heavy cabinet (oak, 100 pounds empty).  I will wrestle it out to plug in the cord but I need one that doesn't extend 3" from the wall.  Something like the molded plug pictured below.

Anyone have a link? 

Thanks,

[howardnair]

http://www.mounts.com/product?product=PSD-ACR72
i don't see how to purchase it!!
http://www.pacificcable.com/Picture_Page.asp?DataName=S-PWR-MFX2-12
http://www.smarthome.com/78924/Calrad-55-789RT-Short-Extension-Cord-with-3-Prong-Right-Angle-Flat-Plug-Black-1-Foot/p.aspx

[Grainger49]

Howard,

Thanks for the links.  But I'm looking for a plug that can be attached on the "feed" end of a Bottlehead power cord.  The pictured plug is on a 12" device like the third link. 

But what I'm wanting to do is find one that can be screwed on  then shrink tubed to permanency. 

[RPMac]

http://www.grainger.com/Grainger/HUBBELL-WIRING-DEVICEKELLEMS-Insulgrip-Straight-6A665?Pid=search

more  http://www.grainger.com/Grainger/wwg/search.shtml?searchQuery=plug+angle&op=search&Ntt=plug%7Cplug+angle&sst=All&N=14909

[Grainger49]

Robert,

A-HA!  That is the booger I have been looking for and look where it is!  I have never seen my name so many times on a page in a catalog.

Thank you!  Knowing Hubbell it will flip 180 degrees too.

[howardnair]

robert-i also thank you-as i also needed one --so i bought two-as grainger says --that is the booger--

[Grainger49]

I just ordered 2, from Grainger (WW, that is).

[2wo]

So, did you give yourself a discount?  ...John

[Grainger49]

I did think about asking for one. 

When giving my name after I said, "Grainger" I said, "You can spell that one."  and she laughed.