SEX 2.1 headphone jack question <SOLVED>

ditdah · 2880

0 Members and 1 Guest are viewing this topic.

Offline ditdah

  • Full Member
  • ***
    • Posts: 66
on: November 03, 2012, 03:26:05 PM
Hey folks.  Putting together my SEX 2.1.  Of course...have a couple questions:

- the manual has another style of headphone jack than the one I received.  So, when it refers to put X wire on terminal # of the headphone jack...you get the picture.  I have the newer style (round tube...not square)...so, can anyone point me to a diagram which shows which terminal is what # noted in the manual?  IE...which is terminal 3 on the jack...so on so forth?

-Just to confirm.  On the plate chokes...both the right and left...BOTH have their black leads clipped right?  Just wanted to make sure.  I believe this to be correct...clip both black leads.

Thanks everyone.  Much appreciated.
« Last Edit: November 05, 2012, 08:45:04 PM by ditdah »

Kenneth Koller


Offline fullheadofnothing

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 1487
  • A noble spirit embiggens the smallest man
Reply #1 on: November 03, 2012, 07:52:34 PM
I think you got the wrong manual. When the square jack was discontinued, a quick one sheet was made to explain how to wire the round jack until the manual could be revised. There is now a version of the manual that shows the round jack. A couple other things also got fixed with that manual. PM me your e-mail and I can send you the correct one.

Joshua Harris

I Write the Manuals That Make The Whole World Sing
Kit Packer Emeritus


Offline ditdah

  • Full Member
  • ***
    • Posts: 66
Reply #2 on: November 03, 2012, 09:00:48 PM
Well, I'm stuck at that point...someone point me in the right direction.  I can't proceed until i have clarification.

Kenneth Koller


Offline proud indian

  • Full Member
  • ***
    • Posts: 159
Reply #3 on: November 04, 2012, 01:03:45 AM
I built mine a few months ago, and it was shipped with a jack, different from the one in the manual. They sent me a write up on how it was to be connected. Write to Doc and he will guide you.

shreekant :)

system 1. oppo, quickie,SEX 2.1 ( V cap), Decware DFR8 in ZOB cabs
System 2. Tascam cd200, Terra Dac,Zbox,Decware Zen amp(V cap) Lowther PM6A in Acousta horns.
Maple rack, Brass footers,Power conditioner, dedicated treated room, iso pads, plenty of tubes. All cables DIY.


Offline Grainger49

  • Hero Member
  • *****
    • Posts: 7175
Reply #4 on: November 04, 2012, 01:12:12 AM
You may have missed the last sentence.

  .  .  .   PM me your e-mail and I can send you the correct one.



Offline ditdah

  • Full Member
  • ***
    • Posts: 66
Reply #5 on: November 04, 2012, 05:24:12 AM
Indeed...read too fast...and was on my 4th glass of wine.

...however, PM sent this morning ;)

thanks folks.

Kenneth Koller


Offline Anton

  • Full Member
  • ***
    • Posts: 72
Reply #6 on: November 05, 2012, 04:04:49 PM
Hello,
I have the same problem as a topic starter. I have a different headphone jack, than in the instruction manual: I have a round one, while manual description is for a square jack.
Could any of you guys please e-mail me the right headphone jack wiring instructions at [email protected]

I would really appreciate that.

regards,
Anton Petukhov
« Last Edit: November 05, 2012, 04:14:21 PM by Anton »

Eros phono / Foreplay III extended upgrade / Paramount 300B/ S.E.X. 2.1 impedance switch upgrade


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19694
Reply #7 on: November 05, 2012, 04:23:17 PM
E-mail sent.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man


Offline Anton

  • Full Member
  • ***
    • Posts: 72
Reply #8 on: November 06, 2012, 12:47:50 AM
Thank you very much - I got the e-mail.

Anton Petukhov

Eros phono / Foreplay III extended upgrade / Paramount 300B/ S.E.X. 2.1 impedance switch upgrade