Crack Manual- Power Supply Assembly Question

kevin flynn · 4391

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline kevin flynn

  • Jr. Member
  • **
    • Posts: 23
on: July 04, 2010, 04:16:10 AM
Hello,

New to Bottlehead. Recently purchased Crack kit, 6-28-10. Assembly OK, but at finish realize that the steps for completion of the power supply, i.e. addition of the three 220uf ps caps and last resistor are missing. Checking numbering of manual pages, print out is minus page 30. Supplied disc  manual page numbers are continuous, but doesn't show the section for completion of the power supply.

Any help / source for this section of manual? I'd rather not guess!

Thanks,

Kevin
« Last Edit: July 04, 2010, 04:18:36 AM by kevin flynn »


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19750
Reply #1 on: July 04, 2010, 08:36:11 AM
I know Doc and Eileen are around, I'd give them a call and see if they can e-mail you a complete manual.  I would do it, but I'm away from my machine with all the manuals, and mine are a bit out of date.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline grufti

  • Sr. Member
  • ****
    • Posts: 320
Reply #2 on: July 04, 2010, 10:33:08 AM
I just sent you a Private Message on this forum with a .png image of page 30.


Offline kevin flynn

  • Jr. Member
  • **
    • Posts: 23
Reply #3 on: July 04, 2010, 01:52:28 PM
Got it... thanks Grufti.

Kevin


Offline shanman

  • Newbie
  • *
    • Posts: 9
Reply #4 on: July 04, 2010, 02:26:14 PM
5/28 version manual is missing page 30 Filter Capacitors. Anyone know how/where I can get this?  I'm anxious to finish this project today.  Thanks


Offline druelle

  • Newbie
  • *
    • Posts: 6
Reply #5 on: August 16, 2010, 09:12:07 PM
Was in the same situation but just came across this post by Doc B.:

Quote from: Doc B. on July 06, 2010, 08:44:51 AM
Sorry about the missing page! Here's a link to it:

http://www.bottlehead.com/docs/Crack%20manual%20page%2030.pdf


Offline Grainger49

  • Hero Member
  • *****
    • Posts: 7175
Reply #6 on: August 17, 2010, 12:38:19 AM
There should be a sticky in each product's file with manual corrections, if needed. 

I know Doc has posted the corrections, but I don't think they have been "stuck."  They float down as new threads are entered.


Offline HF9

  • Sr. Member
  • ****
    • Posts: 346
  • Zynsonix.com
    • Zynsonix.com
Reply #7 on: April 22, 2013, 05:40:09 PM
bumping an old topic, but rebuilding a crack and my manual on CD does not have the elusive page 30 and I noticed the link is dead :( The steps missing are the fitment of the 220uf power caps in the power supply and the little yellow resistor, if I'm not mistaken. I'd imagine I could figure it out from final photos if no one has it, but I like to be sure everything is absolutely in it's right place before initial power on.

Thanks guys!
 

My DIY Audio Electronics Blog: DIYAudioBlog.com

Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19750
Reply #8 on: April 22, 2013, 06:42:07 PM
Quote from: HF9 on April 22, 2013, 05:40:09 PM
bumping an old topic, but rebuilding a crack and my manual on CD does not have the elusive page 30 and I noticed the link is dead :( The steps missing are the fitment of the 220uf power caps in the power supply and the little yellow resistor, if I'm not mistaken. I'd imagine I could figure it out from final photos if no one has it, but I like to be sure everything is absolutely in it's right place before initial power on.

Thanks guys!

Shoot me a PM with your name and e-mail and I'll grab a link for you.

-PB

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Pages: 1   Go Up
« previous next »