Electronics book or reference website

wullymc · 2247

0 Members and 1 Guest are viewing this topic.

Offline wullymc

  • Sr. Member
  • ****
    • Posts: 255
on: April 23, 2013, 10:55:04 AM
Hi everyone,

I am hoping people could give some advice on an electronics book that would explain things in layman terms.  I have been on this forum and a lot of great information is discussed but still a lot goes over my head!   I want to get better and understand.

I can't afford to go back to school for an Electronics Engineering degree, both I don't have the time or money!  I would like to get your thoughts on a book that you would recommend or a website or other resource that you would recommend so that I can get better educated .

Thanks in advance....Dave

Dave
Project RPM5.1 with 2M Bronze/Graham Slee Era Gold V/Quickie with PJCSS/Paramount 1.1 300B/Woden Valiant

ODAC/Crack/DT880 600ohm

Current Project:  Beepre!!!


Offline pdxgrampa

  • Full Member
  • ***
    • Posts: 94
Reply #1 on: April 23, 2013, 11:36:31 AM

Greg
Music Hall 5.1SE,EROS. OPPO 980HD, Music Hall 25.3 Dac. BeePre/BeeQuiet. Paramount V1.1 300B,Orca Deluxe W/ Subs/SPA250s.Stereomour W/Orca Deluxe. Crack W/Speeball(2) .Beyerdynamic 990s.Crackheadphone.


Offline Alonzo

  • Sr. Member
  • ****
    • Posts: 461
  • Not all those who wander are lost
Reply #2 on: April 23, 2013, 02:25:30 PM
Google NEETS Modules 6, 7, and 8.  Also RCA Radiotron Manual.  These should give you the basics for free.  There are plenty of "books of knowledge" on tubes and tube amps out there.

Alonzo
Gameroom:>Mainline to HD820, SR45 to Pipette
>BeePree Kaiju & SII to Altec 19 knockoffs
Office:>BH Stat amp to Koss 95x, T20 SET to JBL 4309s
Den:> MorePlay 845 SET to Altec Valencia's


Offline howardnair

  • Sr. Member
  • ****
    • Posts: 329
Reply #3 on: April 23, 2013, 02:35:33 PM



Offline rif

  • Full Member
  • ***
    • Posts: 151
Reply #4 on: April 23, 2013, 02:39:32 PM
Lots of info, but some of it is specific to guitar amps.

http://www.aikenamps.com/index.htm


-david


Offline chard

  • Full Member
  • ***
    • Posts: 75
Reply #5 on: April 23, 2013, 04:31:08 PM
On the site www.vacuumtubes.net there is a link to a short discription of how vacuum tubes work. This is a good place to start. The link is on the left side of the page and is entitled: How vacuum tubes work

Clifford Hard


Offline wullymc

  • Sr. Member
  • ****
    • Posts: 255
Reply #6 on: April 23, 2013, 10:50:11 PM
Thanks so much guys.  I truly appreciate it

....now off to reading.  Take care...Dave

Dave
Project RPM5.1 with 2M Bronze/Graham Slee Era Gold V/Quickie with PJCSS/Paramount 1.1 300B/Woden Valiant

ODAC/Crack/DT880 600ohm

Current Project:  Beepre!!!


Offline ironbut

  • Sr. Member
  • ****
    • Posts: 470
Reply #7 on: April 26, 2013, 08:20:19 AM
Hey Dave,
I found the Crowhurst series on tube circuits particularly good for a relative beginner (which I still consider myself to be).
You can download them from Pete Millett's site that was linked to earlier.

steve koto


Offline rif

  • Full Member
  • ***
    • Posts: 151
Reply #8 on: May 27, 2013, 03:17:39 PM
I recently discovered this site. A ton of info, blogs and articles going back to the 90s.

www.tubcad.com

-david