Cheap & Heavenly: DL103R, homebrew Cinemag 3440A @150 ohm & Seduction w/C4S

Downhome Upstate · 5070

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline Downhome Upstate

  • Sr. Member
  • ****
    • Posts: 289
on: June 08, 2013, 02:38:08 PM
Lovin' this combination. Getting a lot deeper into the vinyl than with my Audio Techinca AT7V. The DL103R, which Denon's QC guy measured at 0.27 mv, is a snap to set up, no fuss loaded at 150 ohms (1:17.7), and should produce about 4.78 mv into the Seduction. Seems like more than that, tho'. I thought I was going to have sensitivity problems, but no sir. It's all good.

"Too soon old;
   Too late schmart"

    The late Mr. Fox, Fox's Deli, Rochester, NY

Mike P.

Offline earwaxxer

  • Hero Member
  • *****
    • Posts: 1336
Reply #1 on: June 08, 2013, 03:13:42 PM
Quote from: Downhome Upstate on June 08, 2013, 02:38:08 PM
Lovin' this combination. Getting a lot deeper into the vinyl than with my Audio Techinca AT7V

Thats what its all about - going deeper. I love it!

Eric
Emotiva XPA-2, Magnepan MMG (mod), Quickie (mod), JRiver, Wyrd4sound uLink, Schiit Gungnir, JPS Digital power cord, MIT power cord, JPS Labs ultraconductor wire throughout, HSU sub. powered by Crown.

Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19766
Reply #2 on: June 08, 2013, 04:27:00 PM
You certainly have that setup nailed, you'll get every ounce that the Seduction has to offer!

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline Downhome Upstate

  • Sr. Member
  • ****
    • Posts: 289
Reply #3 on: June 08, 2013, 05:27:06 PM
And the matched pair of NOS Amperex orange label gold pin 6922's don't hurt a thing!

"Too soon old;
   Too late schmart"

    The late Mr. Fox, Fox's Deli, Rochester, NY

Mike P.

Pages: 1   Go Up
« previous next »