Tolex Prep

rlyach · 5511

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline rlyach

  • Full Member
  • ***
    • Posts: 227
on: March 04, 2013, 05:48:07 AM
I just ordered my Toad kit and I wanted to cover the frame in tolex. I saw at least one other person did this and I was wondering if the rabbet where the plates fit needed to be made larger to accommodate the tolex thickness? Since this is my first time using tolex I was also wondering if I needed to do a 1/4 round on the edges of the frame or can I just leave the sharp edge. Thanks.

Randy

Randy Yach

Offline Pfenning

  • Full Member
  • ***
    • Posts: 138
  • My knockoffs
    • This is the place
Reply #1 on: September 17, 2013, 07:27:29 AM
Hey Randy. I haven't been around here much, and I just saw this. I didn't modify the cabinet at all. I just used a putty knife to seat the tolex in the rabbet. It went fairly easy. Good luck.

Pfenning

Pfenning

Paramour 1's with c4s and iron upgrade, Foreplay II, Seduction with c4s, Crack (stock) and Foreplay III (waiting to be built), DIY turntable with Rega RB250 arm with Incognito wiring, Oppo DVD, Pi Stage 4's and DIY subs

Pages: 1   Go Up
« previous next »