Possible replacment for a missing fiber shoulder washer?

[Shaldome]

Hello everyone,

I started assembling my crack today and noticed during the transformer step that one of the fiber shoulder washers is missing. I already checked every square millimeter of my carpet around my desk and the desk itself, but it is nowhere to be found.
As I planned on building it during my week off I wanted to ask, if there might be a chance to get a replacement for it myself, without having to contact Bottlehead for it.

Thank you in advance for any help.

[Paul Birkeland]

You might be able to find one at a specialty fastener store.  It needs to be made to sit in a 0.25" hole and to accept a #8 screw. 

-PB

(We can send you a replacement though, that is what I would recommend)

[Natural Sound]

http://www.keyelco.com/category.cfm/Shoulder-Washers-Bushings/Fibre-Shoulder-Washers/p/448/id/713/c_id/813
http://www.keyelco.com/product.cfm/Fibre-Shoulder-Washers/3065/p/430/id/448/c_id/813/product_id/2167

[Shaldome]

Thank you both for the suggestions. I would have contacted Bottlehead, if I were not living in Germany and wanted to finish the project during my week off. Therefore I asked, if there was a possibility to get a replacement myself.
I will look around in town tomorrow and if I am not able to find something useful, I will contact them and continue when the replacement arrives.

[mcandmar]

There the ones, i ordered a bunch of them from Mouser recently http://ie.mouser.com/Search/ProductDetail.aspx?R=3065virtualkey53400000virtualkey534-3065 Doesn't really help you get them quickly though 

[Grainger49]

Shaldome,

You can put in the fiber washer after assembly, but it is difficult.  Cover your a$$ and order one from Bottlehead as well.