Electrolytic cap values for the PSU in ver 2.1

sbelyo · 1816

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline sbelyo

  • Full Member
  • ***
    • Posts: 117
on: April 25, 2014, 04:03:49 AM
Hello...

I have not yet purchased a S.E.X. kit but I plan to shortly.  Could someone tell me what the electrolytic cap values for the PSU are.  I'd like to see if I can find some Blackgate caps that will work. 


Offline mcandmar

  • Hero Member
  • *****
    • Posts: 1599
  • Not all engineers are civil
Reply #1 on: April 25, 2014, 04:12:45 AM
You would need 450v caps which i don't think exist in Blackgates. The supplied Panasonics for the power supply are about as good as you can get, certainly i haven't found any suitable replacements with better specs.  Personally i wouldn't bother doing anything with them, you would be far better off putting the money into decent teflon or film caps for the audio path instead.

M.McCandless

Offline sbelyo

  • Full Member
  • ***
    • Posts: 117
Reply #2 on: April 25, 2014, 04:23:22 AM
Yeah, 350v is the highest I can put my hands on.  I agree about putting the money into the signal path. That's where it'll go


Offline Grainger49

  • Hero Member
  • *****
    • Posts: 7175
Reply #3 on: April 25, 2014, 09:18:14 AM
The power supply improvements are down the line from C4S, NOS tubes and Film coupling caps in the bang for the buck list.


Pages: 1   Go Up
« previous next »