Reduction vs. Grado PH-1 modified

ALL212 · 3725

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline ALL212

  • Sr. Member
  • ****
    • Posts: 542
on: June 11, 2014, 06:03:37 PM
No contest.  Grado got new caps, wiring and RCA's.  Grado sounds like a blanket is over it and it sounded like that before the mods, hence the mods and it did help (a lot less "grain" in the sound) but not near enough.  Grado is back in the box and the Reduction is back where it belongs.

(https://forum.bottlehead.com/proxy.php?request=http%3A%2F%2Fi905.photobucket.com%2Falbums%2Fac253%2Fall212212%2FDSC_1676_zps92d51903.jpg&hash=430482925a51919d2cb850bd38250d6cbc83f63c)

Aaron Luebke

Offline mcandmar

  • Hero Member
  • *****
    • Posts: 1599
  • Not all engineers are civil
Reply #1 on: June 12, 2014, 06:41:21 AM
Out of interest what opamp chip is in that thing?

I built a few Grado RA1 headphone amp clones and they can sound ok, but way way over priced for all they are.  i.e. a simple opamp and a few caps in a wooden box.

M.McCandless

Offline ALL212

  • Sr. Member
  • ****
    • Posts: 542
Reply #2 on: June 12, 2014, 02:09:48 PM
Some clever person with a dremel tool erased all the identification on that chip.  I'm assuming it's in the chipness protection program... ::)
« Last Edit: June 12, 2014, 02:17:15 PM by ALL212 »

Aaron Luebke

Pages: 1   Go Up
« previous next »