Original sex mono help

najo49 · 3256

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline najo49

  • Full Member
  • ***
    • Posts: 169
on: August 24, 2014, 05:52:09 AM
The low voltage cap on the cathode is o ver heating then blowing in a matter of seconds.help would be apprec.jan olsen

Jann Olsen, [email protected].  Lowther medallion 2 with pm2a./ extended foreplay lll,/EROS phono /Grado ref/ SOTA star Vacuum SME V, /  45 amp direct coupled,c4s,mQ nickel  / paramour  2a3 w MQ iron /Original SEX monos /Jena Cables /heathkit wm6a/ proAc Tablette 50 sig , with push pull

Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19745
Reply #1 on: August 24, 2014, 06:34:00 AM
The cathode resistor is open, replace it.  (This was part of the last old school SEX mono repair that I did)

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline Paul Joppa

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 5831
Reply #2 on: August 25, 2014, 05:48:04 PM
Replace the cathode resistor with one rated for more power - 5 watts is good. I'd use a 35v cap, too.

Paul Joppa

Pages: 1   Go Up
« previous next »