Extended Foreplay III with MJE350 Transistor Regulator Board dropping channels

jlharden · 23161

« previous next »
Pages: 1 2   Go Down

0 Members and 1 Guest are viewing this topic.

Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19871
Reply #15 on: September 09, 2014, 08:57:35 AM
Is the nature of the noise added by the Foreplay hum or tube rush?

-PB

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline jlharden

  • Jr. Member
  • **
    • Posts: 10
Reply #16 on: September 09, 2014, 10:19:28 AM
Probably more tube rush component than hum.


Offline Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9680
    • Bottlehead
Reply #17 on: September 09, 2014, 11:09:54 AM
If you can, turn down the each of the attenuators on your crossover 3 or 6dB, so that you maintain the proper balance between frequncy bands. Then you can turn the preamp volume up 3 or 6dB and that will improve the signal to noise ratio by the same amount.

Dan "Doc B." Schmalle
President For Life
Bottlehead Corp.

Offline jlharden

  • Jr. Member
  • **
    • Posts: 10
Reply #18 on: September 09, 2014, 01:48:50 PM
I will work with the gain structure. Thanks Doc!


Pages: 1 2   Go Up
« previous next »