Smoked the 2 270 ohm resistors I put in, didn't check, they were only 5W and got pretty hot. Replaced them with C7 chokes from a Crack experiment I had and now I'm back up and running. Still don't know why I had such high current previously. The power supply transformer and the chokes are warm, but nothing like before, gonna get a IR thermometer and check the temps.
Ran some Valve Art 2A3 in the amp for a hour before switching to Sophia mesh plates. Rodrigo Y Gabriela 11:11 playing to start the break in.
It'll stay this way until I learn what output cap to sub inplace of the 0.66 clarity's in there now and I get some iron delivered from Magnequest.
Thanks for the help.
Alonzo
Alonzo
Gameroom:>Mainline to HD820, SR45 to Pipette
>BeePree Kaiju & SII to Altec 19 knockoffs
Office:>BH Stat amp to Koss 95x, T20 SET to JBL 4309s
Den:> MorePlay 845 SET to Altec Valencia's