really short leads on transistors for c4s boards

ramalamadingdong · 2243

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline ramalamadingdong

  • Newbie
  • *
    • Posts: 9
on: April 26, 2015, 06:29:30 AM
they barely poke through the holes on the pcbs. The hole on the heat sink seems too high. How do you solder them?! Do I just flood the joint and hope for the best? That doesn't seem right.


Offline STURMJ

  • Sr. Member
  • ****
    • Posts: 279
Reply #1 on: April 28, 2015, 12:50:08 PM
I think there are no answers here, because it is realy hard to picture what exactly is going on. Did you cut the leads or did they show up short? Maybe the heatsink is upside down?  I think a pic would definitely help to see what is going on.


Offline Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9658
    • Bottlehead
Reply #2 on: April 28, 2015, 12:56:58 PM
Are these a recent acquisition, or something you got a while ago? We did get a batch of MJE5731As that had kind of short leads, but that was about a year ago.

Dan "Doc B." Schmalle
President For Life
Bottlehead Corp.

Offline ramalamadingdong

  • Newbie
  • *
    • Posts: 9
Reply #3 on: April 29, 2015, 02:11:49 PM
july last year


Offline ramalamadingdong

  • Newbie
  • *
    • Posts: 9
Reply #4 on: April 29, 2015, 02:12:53 PM
I know its sad, but I have a lot of competing interests in life right now.


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19751
Reply #5 on: May 02, 2015, 07:27:26 AM
If you e-mail replacementparts(at)Bottlehead(doht)com, we can pop out some replacements for you. 

(Incidentally, I ended up with the remainder of these last year, as they work perfectly well in some kits, but not others)

-PB

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline ramalamadingdong

  • Newbie
  • *
    • Posts: 9
Reply #6 on: May 02, 2015, 10:52:21 AM
Already done! You guys are great. If you need them back, I'm more than happy to send since they'll likely just sit in my house.


Pages: 1   Go Up
« previous next »