Best output impedance for Audeze LCD-2.2?

crooner12 · 2708

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline crooner12

  • Jr. Member
  • **
    • Posts: 27
    • My YouTube Channel
on: May 07, 2015, 08:50:30 AM
I'm getting the S.E.X. 2.1 amp and was wondering which output impedance fellow LCD-2.2 owners use.

The LCD-2 is rated at 70 ohms, so guessing 32 would be ideal?

Mark
Current projects: Stereomour

Offline Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9787
    • Bottlehead
Reply #1 on: May 07, 2015, 10:09:20 AM
My hunch would be that 8 ohms might be the best balance of low noise floor and a high out impedance to load ratio to help keep the top end of the LCDs sounding open.

Dan "Doc B." Schmalle
Former President For Life
Bottlehead Corp.

Offline crooner12

  • Jr. Member
  • **
    • Posts: 27
    • My YouTube Channel
Reply #2 on: May 08, 2015, 07:28:39 AM
I called Audeze and they suggested 32 ohms. Easy solution: I just ordered the impedance switching kit! Will try to post impressions on my blog and YT channel once it's up and running.

Mark
Current projects: Stereomour

Offline Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9787
    • Bottlehead
Reply #3 on: May 08, 2015, 07:35:50 AM
That would be the best approach.

Dan "Doc B." Schmalle
Former President For Life
Bottlehead Corp.

Pages: 1   Go Up
« previous next »