extended upgrade question

saildoctor · 15732

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline saildoctor

  • Full Member
  • ***
    • Posts: 140
on: June 26, 2010, 01:54:00 PM
I've been getting the extended upgrade boards ready to put into my completed Foreplay III.  I noticed when putting together the two C4S layouts that the two 237ohm 1/4watt resistors shown in the instructions appear to be replaced with 1/8watt in my kit.  Is it going to be alright to use these in place of the 1/4w's?  Just thought i would ask before I soldered them up!  Thanks.
« Last Edit: June 26, 2010, 02:00:12 PM by saildoctor »

Kerry Sherwin

45 Paramounts, 6SN7 Extended FPIII, OC3 regulated Seduction
Blumenstein Orca Deluxe / 2x Orca Subs
VPI Classic / ADC CD-100x

Offline Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9680
    • Bottlehead
Reply #1 on: June 26, 2010, 07:09:18 PM
Yup. Voltage drop is about 0.85V across the resistor. Power is V2/R, so power dissipation of the resistor is about .003 watts.

Dan "Doc B." Schmalle
President For Life
Bottlehead Corp.

Pages: 1   Go Up
« previous next »