Which preamp for HD650s and McIntosh MC50 power amps

rdonahue · 2222

0 Members and 1 Guest are viewing this topic.

Offline rdonahue

  • Jr. Member
  • **
    • Posts: 23
on: February 11, 2016, 03:44:30 PM
Hi all, first time poster. I have a pair of fully restored McIntosh MC50 power amps but I don't have the spare coin for a vintage MX110 or C34v preamp to pair with them. Which Bottlehead amp would be good for a beginner but I would be able to use with headphones when I want but also to be able to plug into my monoblock amps for stereo use?



Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19698
Reply #1 on: February 12, 2016, 07:31:30 AM
What speakers do you plan to use with your MC50's?  How many sources do you have?

The Mainline would be pretty well suited to what you're looking for, and you could simply buy/have made a very nice 1/4" to RCA cable to use when you want to listen to your amplifiers instead of headphones.  You could also add a spare set of RCA jacks on the back as a second set of outputs.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man


Offline rdonahue

  • Jr. Member
  • **
    • Posts: 23
Reply #2 on: February 12, 2016, 07:36:02 AM
I have a pair of Wharfedale Denton speakers. My sources would be a CD player, turntable, and RaspFi w/ DAC.



Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19698
Reply #3 on: February 12, 2016, 03:50:57 PM
With three sources, you can either have a very good preamp that can't drive headphones (BeePre), or a very good headphone amp for some headphones but not the greatest preamp in the world (Crack-a-two-a). 


Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man


Offline braubeat

  • Full Member
  • ***
    • Posts: 110
Reply #4 on: February 14, 2016, 06:23:57 AM
has anyone tried the BeePre with hd650? might actually work pretty well


Michael



Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19698
Reply #5 on: February 14, 2016, 08:52:26 AM
The output impedance of the BeePre is far too high for this duty.  You would get very distorted, very flabby bass that would be pretty irritating to listen to.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man