overlong leads-i burnt some insulation near solder joints - removed burnt wire

mike langer · 1287

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline mike langer

  • Jr. Member
  • **
    • Posts: 15
on: June 26, 2016, 08:58:28 PM
 insulation    and nothing is shorted can i leave like this ? or repair with liquid elec tape, regular elec tape or must leads be removed and resoldered? (lots of work) this is my first build and going great-my opinion
Thanks everybody
« Last Edit: June 26, 2016, 09:00:33 PM by mike langer »


Offline Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9662
    • Bottlehead
Reply #1 on: June 27, 2016, 04:35:33 AM
Posting a picture might be helpful. The best way is usually to disconnect the wire and slip a piece of heat shrink tubing over the bare section, then reconnect.

Dan "Doc B." Schmalle
President For Life
Bottlehead Corp.

Pages: 1   Go Up
« previous next »