Copper clad SII

Guest · 2014

0 Members and 1 Guest are viewing this topic.

Deke609

  • Guest
on: October 06, 2018, 03:16:32 PM
Got around to cladding my new SII in 30 ga copper sheet, with copper "hats" for the PC3's. Photo is not the best (taken with an old phone), but it conveys the essence of it.

It is still shiny, but will turn a deeper copper red/brown with time.  I am pretty pleased with how it turned out.

If I ever get a Kaiju I will use brass.

cheers,

Derek



Offline kgoss

  • Sr. Member
  • ****
    • Posts: 329
Reply #1 on: October 07, 2018, 04:58:40 AM
Looks great Derek!  I really like the look and I don’t believe I have seen another one like it.
Enjoy!

Ken Goss


Offline Jamier

  • Sr. Member
  • ****
    • Posts: 382
Reply #2 on: October 07, 2018, 05:25:37 AM
Unique, beautiful. Very nice!

Jamie

James Robbins


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19694
Reply #3 on: October 07, 2018, 05:42:33 AM
Wow, that looks great!  I can only imagine how much time it took.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man


Deke609

  • Guest
Reply #4 on: October 07, 2018, 07:43:09 AM
Thanks Ken, Jamie and PB.

@Paul Birkeland - only about 6 hrs or so.  30 ga will readily bend over a hard square edge to 90 - no press brake needed.  I just clamped it between two pieces of melamine (ikea type stuff) and used  the SII wooden base (which is always the exact length of the bend you are making) to fold the copper to 90. Cuts with heavy duty scissors (I used my kitchen shears b/c they left a nice edge) and a heavy duty utility knife where the scissors can't reach or would warp the copper.  You just need to be careful to keep the sheet supported at all times to prevent creases.

Added benefit: it acts as a heat sink for the top plate.  The copper gets warm (but not hot).

And I suppose it acts a shield too -- for EMI, RFI and UFOs.  I may make myself a copper "clear thinking" hat with the leftovers  ;D

« Last Edit: October 07, 2018, 07:56:14 AM by Deke609 »



Offline kritpoon

  • Jr. Member
  • **
    • Posts: 12
Reply #5 on: October 10, 2018, 09:47:15 PM
That's really nice looking!



Deke609

  • Guest
Reply #6 on: October 12, 2018, 10:02:03 AM
Thanks! 



Offline johnsonad

  • Hero Member
  • *****
    • Posts: 1670
Reply #7 on: October 12, 2018, 02:14:07 PM
Very impressive! It looks great!

Aaron Johnson


Deke609

  • Guest
Reply #8 on: October 13, 2018, 05:40:33 PM
Thanks Aaron!