Filing acrylic top?

rockdrummer · 3535

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline rockdrummer

  • Full Member
  • ***
    • Posts: 103
on: December 23, 2016, 07:29:08 AM
Hi, I'm going to try to file the anti rotation hole for the selector switch. I can't get it to fit. It sits about a 16th of an inch too far out.  Will the acrylic chip off or will I be okay as long as I'm going slow?

Thanks.
Ben
« Last Edit: December 23, 2016, 07:30:39 AM by rockdrummer »


Offline rockdrummer

  • Full Member
  • ***
    • Posts: 103
Reply #1 on: December 23, 2016, 08:15:55 AM
I'm just going to try. It will be interesting he knob anyway.
I like the light purple color I have. Almost an ice-like color.
I will post a picture when I'm done installing.
Ben


Offline BNAL

  • Sr. Member
  • ****
    • Posts: 354
Reply #2 on: December 23, 2016, 09:26:31 AM
Is the hole to small or in the wrong place? On my kit the hole was tight but fit with moving it around a little.

Brad Nalitt
Iron Upgraded S.E.X. Amp 2.0
Foreplay III
Quickie w/PJCCS
Eros Phono
Blumenstein Orca Speakers, Baby Benthic Subs
S.E.X.y Speakers W/FT17H Horn Tweeters
Thorens TD 125 MkII W/ Shure M97xE JICO SAS Stylus

Offline rockdrummer

  • Full Member
  • ***
    • Posts: 103
Reply #3 on: December 23, 2016, 09:49:16 AM
Wrong place. I was really pushing it and I just couldn't get it to reach. I noticed I was bending the top plate while trying to force it. Just a bit too far.




Offline rockdrummer

  • Full Member
  • ***
    • Posts: 103
Reply #4 on: December 23, 2016, 10:04:25 AM
Trying to post a picture. It's off way less than 1/16. But I don't want to force it.


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19772
Reply #5 on: December 23, 2016, 12:21:48 PM
This part is a moderately snug fit.  A bit of pressure may be all that's required.

-PB

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline rockdrummer

  • Full Member
  • ***
    • Posts: 103
Reply #6 on: December 25, 2016, 03:57:40 PM
Fits now. Looks great. I can't post a picture though. Still working on it.

Got it to post the pic.
Ben

« Last Edit: December 25, 2016, 04:00:02 PM by rockdrummer »


Pages: 1   Go Up
« previous next »