Parts for Crack with Speedball Repair

RetroJonezin · 2819

0 Members and 1 Guest are viewing this topic.

Offline Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9645
    • Bottlehead
Reply #15 on: January 06, 2017, 05:28:13 AM
Do solder the connections. The most common issue with an amp not working is a bad connection. Leaving the joints dry will greatly increase the possibility of this happening. The plastic insulators are necessary to isolate the RCA jack signal grounds from the chassis in order to avoid ground loops.

Dan "Doc B." Schmalle
President For Life
Bottlehead Corp.