Snap! While wiggling output tube (resolved)

BZ58 · 1533

0 Members and 1 Guest are viewing this topic.

Offline BZ58

  • Full Member
  • ***
    • Posts: 55
on: May 24, 2017, 01:57:33 AM
Trying out some output tubes. Loud SNAP! happens when wiggling tube. Left channel stopped working. Same happens now with stock tube.

Both LEDs are lit up. Fuse looks like new.

« Last Edit: May 25, 2017, 01:58:16 AM by BZ58 »



Offline BZ58

  • Full Member
  • ***
    • Posts: 55
Reply #1 on: May 24, 2017, 02:03:12 AM
First time soldering. Did I use too little? Too much?

Simple question by the way. Is the term "reflowing" the same as "resoldering"? Also, if I fix a joint, is it sometimes sufficient to reheat the existing solder or is it always best to completely remove it and reapply fresh solder?



Offline fullheadofnothing

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 1487
  • A noble spirit embiggens the smallest man
Reply #2 on: May 24, 2017, 07:01:58 AM
1) Voltages...?

2) Do not move tubes when the amplifier is on.

3) Reflowing can involve adding solder, but only where necessary. Removing and reattaching is only necessary in cases where the attachment was never made in the first place. Your amounts of solder look about right, although several joints look like they were not heated for a long enough time for the solder to properly flow.

Joshua Harris

I Write the Manuals That Make The Whole World Sing
Kit Packer Emeritus


Offline mcandmar

  • Hero Member
  • *****
    • Posts: 1599
  • Not all engineers are civil
Reply #3 on: May 24, 2017, 07:06:05 AM
That bottom pic of the tube socket, there is a red wire on the top right of the image connecting to the terminal strip that doesn't look like its soldered at all.

M.McCandless


Offline BZ58

  • Full Member
  • ***
    • Posts: 55
Reply #4 on: May 25, 2017, 01:56:24 AM
Thanks for the replies!

I resolved the issue.

Reflowing some of the joints worked well. I replaced the 1 1/2" red wire connecting B6 to 9U. Also moved things around with a wooden chop stick as someone suggested in another thread, and found what was making the static.




Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19694
Reply #5 on: May 26, 2017, 12:01:56 PM
B1 and B5 aren't all that well flowed and could produce these symptoms.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man