Copper-clad S.E.X. build

JeffYoung · 5205

« previous next »
Pages: 1 2 3   Go Down

0 Members and 2 Guests are viewing this topic.

Offline JeffYoung

  • Full Member
  • ***
    • Posts: 52
Reply #30 on: October 26, 2017, 12:15:52 PM
It's coming along nicely.  Just about ready for my resistance tests.


(https://forum.bottlehead.com/proxy.php?request=http%3A%2F%2Foi63.tinypic.com%2F2vx3wg3.jpg&hash=f3de2880771ad18d749be8e21f990c7e4776c244)


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19750
Reply #31 on: October 26, 2017, 05:28:37 PM
If you left off the 8.2K resistors (it sorta looks like they aren't in there), then the amp will work but may be a little buzzy.  This may go away with installation of the C4S upgrade that I see in the background.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline JeffYoung

  • Full Member
  • ***
    • Posts: 52
Reply #32 on: October 26, 2017, 10:53:21 PM
Hi Paul,

I was originally trying to save room on the top lugs for film bypasses on the 22uF caps, so I mounted the 8K2 resistors in-line at the bottom:

(https://forum.bottlehead.com/proxy.php?request=http%3A%2F%2Foi65.tinypic.com%2F23lml2o.jpg&hash=fa7d0f1727ae12c7abd45e12addaf353d6527bcc)

Later I concluded that the C4S's would make bypass caps unnecessary so I left them out.

I put the CS resistors on the ends of the flying leads for the C4S boards for now, as my case design will make it difficult to get to them after-the-fact.  (I now fully understand the appeal of everything-on-the-top-plate design. ;))

(https://forum.bottlehead.com/proxy.php?request=http%3A%2F%2Foi66.tinypic.com%2F2nsncwg.jpg&hash=589c1ce171e6708b7a43ceae956c5152dc467afd)


Cheers,
Jeff.


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19750
Reply #33 on: October 27, 2017, 04:00:24 AM
Ah, nice, you tucked those away nicely. 

The top plate design sure does make things easier to build. 

A 22uF/450V axial cap will also fit nicely and sit between the two T-strips if you want to complete the look a little more ;)

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline JeffYoung

  • Full Member
  • ***
    • Posts: 52
Reply #34 on: November 13, 2017, 05:24:22 AM
Finished base kit (haven't installed C4S yet):


(https://forum.bottlehead.com/proxy.php?request=http%3A%2F%2Foi68.tinypic.com%2F9pltzs.jpg&hash=8c00525d09dc82ac5e0b8960da06285de64c3df6)



(https://forum.bottlehead.com/proxy.php?request=http%3A%2F%2Fi66.tinypic.com%2F2vt16oh.jpg&hash=6065f2efcc1d2ca1230e5d2e0b35fd56e26ab55c)


Offline calmiswar

  • Full Member
  • ***
    • Posts: 69
Reply #35 on: November 13, 2017, 05:37:30 AM
That looks classy! Love it.

If I may suggest something, I feel the knobs are an eye sore. Metal knobs would add to the class factor and fit in with the overall design. Just my opinion. Still looks very nice.


Offline Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9657
    • Bottlehead
Reply #36 on: November 13, 2017, 07:51:28 AM
I think the Dakaware knobs are cool.

Dan "Doc B." Schmalle
President For Life
Bottlehead Corp.

Pages: 1 2 3   Go Up
« previous next »