Left/Right Volume Controls

InnerTube · 1672

0 Members and 1 Guest are viewing this topic.

Offline InnerTube

  • Jr. Member
  • **
    • Posts: 27
on: March 21, 2018, 03:22:39 PM
Has anyone configured the Crack with two volume controls - one for left channel and one for right channel.  Is it possible to buy an single attenuation device that will perform both functions.  Does anyone have a source for this type of device.  (high quality)  Thanks in advance, IT

PS - Some people have a listening imbalance and need corrective balance.

Innertube (John Spain)
[email protected]


Offline Paul Joppa

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 5834
Reply #1 on: March 21, 2018, 05:51:20 PM
Google "concentric volume control" - they are used in guitar amps, and fairly widely available.

Paul Joppa


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19757
Reply #2 on: March 22, 2018, 04:11:21 AM
If you have a fixed imbalance in your hearing, you could pad down one channel in the Crack to account for it.  Do you know how many dB it is? (and which ear?)

Dual mono volume pots can be a bit annoying to adjust, though the concentric ones make things a bit easier.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man


Offline Karl5150

  • Sr. Member
  • ****
    • Posts: 629
Reply #3 on: March 22, 2018, 05:48:55 AM
I use dual mono Alps pots (not concentric) on both SEX and Crack amps. As PB points out, bit of a pia.
I used the balance/volume scheme from the Stereomour II on my Quickie, now that's the ticket.
I believe AN and TKD (?) offer boutique products that will work for either of the above.
Karl 

Karl
Downstairs: Planar3>PH-16>Stereomour II>OB Betsy+
Upstairs: RP1>Eros/CD5004>Seductor (2x Monoblocks)>FH3
Office: Modi Uber 2/Sirius>SEX2.1.1>µFonken FF85WK + DC160 subs
BR: FiiO M6>SEX3.0.1>ScanSpeak 10F + TangBand W6 (Mono)/DT770Pro
Garage: X12 streamer>Quicksand>Minimus 77


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19757
Reply #4 on: March 22, 2018, 06:05:37 AM
And I suppose the most obvious choice is the Crack-a-two-a, which has a balance control from the factory.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man


Offline fullheadofnothing

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 1487
  • A noble spirit embiggens the smallest man
Reply #5 on: March 22, 2018, 07:07:41 AM
And I suppose the most obvious choice is the Crack-a-two-a, which has a balance control from the factory.

And is on sale through Sunday.

Joshua Harris

I Write the Manuals That Make The Whole World Sing
Kit Packer Emeritus


4krow

  • Guest
Reply #6 on: March 25, 2018, 11:08:34 AM
 May I take the idea a step further and ask if there are concentric stepped attenuators, creating the possibility of ganging them in the same way as the coarse/fine attentuators offered some models? 



Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19757
Reply #7 on: March 25, 2018, 01:28:07 PM
I have never run into a concentric stepped switch (at least one that's currently manufactured and available for sale).

What we have done on some special projects is to have a stereo coarse and individual fine controls.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man


4krow

  • Guest
Reply #8 on: March 25, 2018, 05:50:58 PM
  The idea of coarse and fine volume works so well in my headphone amp. Should have done this years ago. Mine is a bit different in the way that the coarse volume controls both channels, where as there are two other knobs (fine volume), one for each channel. Try explaining THAT to someone. I just say, "Let me do it."