Capacitor orientation

glynnw · 4018

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline glynnw

  • Full Member
  • ***
    • Posts: 162
on: October 20, 2010, 08:00:17 AM
This weekend my new V-cap capacitors will have received 200 hours of burn-in and be ready for installation as coupling caps.  According to V-cap:


PC, J River software, opticaRendu, Schitt Ygg DAC,Tortuga Pre, Torta Radu tube buffer, Linear Tube Audio ZOTL10, Spatial Audio X5w/pair of GR Research dual 12" open baffle servo subwoofers tamed by DSpeaker Dual-Core DSP , Audience AU24 SE  spkr cable, handmade silver interconnects,

Offline Grainger49

  • Hero Member
  • *****
    • Posts: 7175
Reply #1 on: October 20, 2010, 08:49:44 AM
"Lowest impedance path to ground," reads to me (from Audience) as the green lead for an interstage coupling cap should be attached to driver stage plate, or as a bypass for a positive power supply connected to the negative lead, or as a bypass for a negative power supply connected to the positive lead, or for an output/Parafeed cap connected to the output tube plate.
« Last Edit: October 20, 2010, 01:00:08 PM by Grainger49 »


Offline Paul Joppa

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 5832
Reply #2 on: October 20, 2010, 12:01:23 PM
Green lead to terminal 9. That terminal goes back to the driver (B socket); terminal 7 goes (through the 220 ohm grid stopper) to the 300B grid at A3.

Paul Joppa

Offline glynnw

  • Full Member
  • ***
    • Posts: 162
Reply #3 on: October 20, 2010, 12:53:24 PM
Thanks, Paul, for putting it in terms I can understand.

PC, J River software, opticaRendu, Schitt Ygg DAC,Tortuga Pre, Torta Radu tube buffer, Linear Tube Audio ZOTL10, Spatial Audio X5w/pair of GR Research dual 12" open baffle servo subwoofers tamed by DSpeaker Dual-Core DSP , Audience AU24 SE  spkr cable, handmade silver interconnects,

Pages: 1   Go Up
« previous next »